Pressure Reducing Valve Jacket Insulation

Thermal insulation jackets do more than just give thermal insulation to pressure-reducing valves. As professionals in the construction industry, we have used these numerous times and found no complaints whatsoever. Below we list some reasons why we feel valve covers are the best way to insulate pressure-reducing valves.

Its Make: Valve jackets are made using top-quality silicone glass cloth. Each valve cover has 50mm Rockwool insulation. The low-conductivity mineral wool helps save both energy and money. Valve jackets bring a major difference in energy usage in industrial and commercial environments. 

Thermal Insulation: The low thermal conductivity mineral wool is used to protect the pressure-reducing valves from heat loss. By giving seperior insulation around the PRVs, valve covers help make your building more energy-efficient.  They also protect the pressure-reducing valves from any external damage. This helps improve the longevity of the valves.

Safer Workplace: Since they are made with top-quality silicone-coated glass cloth, these valve covers protect personnel from direct contact with the hot surface of the valves. Also, since valve covers help reduce condensation and sweating in valves, water does not drip from the valves. This significantly helps reduces the formation of small pools of water in the workplace. These pools would otherwise lead to slips or accidents, injuring the workforce. 

Easy to Use and Install: Armed with velcro straps and pull cord, valve jackets ensure airtight insulation even around the awkward angles of the pressure-reducing valves. Also, much unlike the rigid insulation that was previously used to insulate these valves, valve covers are flexible, lightweight and easy to use. You can just as easily re-install them causing no harm to the insulation or PRVs. 

Product Specification:

• Product Sizes: 15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 77mm, 100mm, 125mm and 150mm. 
• Colours: Standard grey, silver, and black. 
• Service Temperature: -20°C to 220°C
• Insulation: 50mm Rockwool
• Type:

1. Internal valve Covers: Internal valve covers for PRVs are made with silicone glass cloth on both the sides
2. External Valve Covers: These valve jackets have an external later made of waterproof PVC cloth whist their inner layer is made of silicone glass cloth.

Key Features:

• Flexible valve jacket insulation for pressure-reducing valves.
• Lightweight, easy to use, handle and install.
• Provides fully sealed insulation to avoid any airborne contamination and possible harm to personnel.
• They ensure hassle-free maintenance.
• Reduces energy bills.
• Cost-effective and convenient.
• Made with high-quality fibreglass cloth. 
• The jackets have velcro flaps and pull cords fixings to ensure airtight insulation.
• Protects valves against rust, dirt and other issues.

Applications:

• Designed to closely fit around a pressure-reducing valve to maximise insulation and prevent heat loss.

Note:

• All Valve jackets are made to order, No returns, refunds or exchanges will be applicable. If you are unsure of the size, please email us a picture of the valve and its dimensions for our experts to access and make the valve covers suitable for your application. We will assist you in any way we can.
• Lead times for screwed valve covers within the UK: 1-10 units: 5-7 working days, Anything above that, please email us for the lead times. 
• ld increase the size of the jacket required and also the cost. If you need chilled/cold water valve covers, please mail us your requirements at [email protected] and we will send you a quote for your order.